Faux-Leather Iron On Patch Instructions

Using a Heat Press

Please read all instructions before applying

  1. Preheat heat press to 270°F and set to medium pressure
  2. Peel the paper backing off the patch (The back of the patch is sticky to assist with positioning)
  3. Position the patch on the garment
  4. Turn garment inside out if possible. (This step is optional, but ensures better application)
  5. Place a piece of parchment paper over the patch and garment to protect from direct heat. (Teflon, uncoated paper or a thin layer of fabric is also acceptable)
  6. Press the garment for 10 seconds
  7. Let the garment cool. Once the garment is cool, your patch should be set onto the garment, if not repeat step 6

Using a Home Iron

Please read all instructions before applying

  1. Preheat your iron to 270°F (Silk/Low Cotton Setting)
  2. Peel the paper backing off the patch (The back of the patch is sticky to assist with positioning)
  3. Position the patch on the garment
  4. Turn garment inside out if possible. (This step is optional, but ensures better application)
  5. Place a piece of parchment paper over the patch and garment to protect from direct heat. (Teflon, uncoated paper or a thin layer of fabric is also acceptable)
  6. Apply firm pressure while moving the hot iron in small circles for 30 seconds
  7. Let the garment cool. Once the garment is cool, your patch should be set onto the garment, if not repeat step 6